Mold manufacturing and product
It has advanced vacuum forming technology and uses silica gel mold to quickly copy similar products
Polyurethane castings of engineering plastics. It is an ideal choice for prototype function test and small batch production.
What Is A Quick Mold?
Rapid molds are also commonly referred to as soft molds, hand molds, or transition molds. Rapid tooling is a crucial step on the path to production and involves the manufacture of a range of tooling tools used to produce products such as rapid injection molds, rapid die casting molds, sheet metal simple molds, rapid fixtures and jigs, and Other custom parts. Manufacturing rapid tooling for pilot production of hundreds or even thousands of parts before mass production is a useful step for design optimization, functional testing, or pre-production verification.

Reasons To Choose Rapid Tooling?
The choice of rapid tooling will depend on three basic factors: lead time, cost and acceptable quality. These are the three main differences between fast dies and traditional dies.
- Lead time: Fast molds have a shorter production cycle due to faster manufacturing. This is especially useful for delivery-sensitive small batch production needs.
- Cost : Rapid molds are more cost-effective than traditional molds. Because it is a simplified process, it takes less time and requires less labor.
- Quality : Parts made with fast tooling are generally less durable and have a shorter lifespan than regular tooling. However, acceptability of minimum quality has a positive effect on your bottom line.
Advantages Of Wacker Rapid Tooling
With our technical experience in CNC machining, EDM machining and surface treatment, we have proven that we are good at rapid tooling and small batch injection molding.
Deliver low-volume injection molded parts of specific materials in 2-5 weeks while exceeding your expectations.
Helps you speed up pre-production testing and validation, shorten the gap to production, go into production with a better design and get to market faster.
Small Batch Injection
Small batch injection molding is a production method for rapid mold manufacturing applied to plastic injection molding. This approach not only provides hundreds of units for trial production to simulate mass-produced parts for pre-production testing and validation, but also enables on-demand production of end-use parts for low-volume production runs.
Why Choose Wacker For Small Batch Injection Molding Production?
At Wake, we combine traditional injection molding with our rapid tooling capabilities, allowing us to quickly and cost-effectively produce custom low-volume injection molded parts. Wake takes a proactive approach to injection molding projects, providing cost-effective and rationalized advice on design, materials, production processes, manufacturability, and more. We determine your best production path based on your project goals and expectations, providing you with better options for your investment in tool life and process technology to ensure your project's success.

Injection Molded Aluminum Molds – Receive Plastic Parts In 3 Weeks Or Less
High-performance aluminum alloys provide fast and efficient machinability and better thermal conductivity, helping to build molds faster and at a lower cost. More than just a bridge for prototyping or speeding up product launches, aluminum molds are a successful alternative to steel molds that will continue to drive and influence the future of the plastics industry.
How Does Small Batch Injection Molding Work?
Need as few as 100 or more than 100,000 plastic parts? Small batch injection molding is a cost-effective solution.
Optimized Design for Manufacturability (DFM)
Design for Manufacturability (DFM) covers every aspect of the injection molding process, from part design, mold design, material selection, to machining. Design problems can be identified without waiting for production, because optimized for manufacturability, our engineers will ensure your parts are moldable and injection molded with the lowest possible manufacturing cost.

Choose the right mold material
The correct mold material will involve considerations such as usage, quantity, and budget, as well as design complexity, mold construction, and more. Not sure which one to choose? We'll help you weigh each of these advantages to find the best solution for your product needs.
We can make quick molds using aluminum 7075, P20 and NAK80 semi-hardened steel, and H13 fully-hardened steel. We also offer standard SPI polishes, EDM textures and a range of etched textures including Mold-Tech™ MT series and VDI™ 3400 series.
Cost-effective mold making process
In order to meet the needs of rapid production and cost reduction, we usually use the method of MUD mold quick change system to save mold opening time and reduce cost. What's more, the engineering changes only involve the MUD core section, not the entire standard mold base. You can also arrange several similar parts in one mold to save even more money. In addition, manual or semi-automatic inserts are often used in rapid tooling.
Wake's tooling engineers will work with you to begin the design review process. We believe that a good solution means adequate communication while ensuring you have access to available resource options.
We will work with you to ensure the success of the complete program. Whether you need a hand mold
can provide reliable and consistent results on time for both type, customized equipment and mass production components.
Submit an inquiry and let's start the discussion!

ONE-STOP SERVICE FROM
PROTOTYPE TO MASS PRODUCTION
TEL: +8617665212526
E-mail:Lip.zhang@wishingwin.com
Factory Address: Building 1, 2, 3, No. 10, Jintian Road, Shijing Community, Pingshan District, Shenzhen
Copyright © 2022 Shenzhen Jiaerxing Technology Co., Ltd. 粤ICP备16064535号
SEO Tag Powered by www.300.cn